What are the spray cleaning processes of industrial aluminum parts?

1. Improve the processing technology, do a good job in the whole process of spray cleaning of industrial aluminum profile accessories, strictly abide by the safety operation procedures, check the operation every day, and observe the main parameters of the processing technology at all times. It is strictly prohibited that the product workpiece stagnates in the machinery and equipment to prevent rust and corrosion.

2. For the method of decontamination agent, because the actual effect of a single group of cleaning agents is poor, multi-component and composite cleaning agents are generally used in the production and manufacture of industrial aluminum profile accessories. Due to the appropriate coordination of strong acid, alkali, convergent carbonate and surfactant, the cleaning agents can give full play to their respective cleaning characteristics, so they can significantly improve the cleaning efficiency and high efficiency.

3, foam and manipulation, in metal cleaning, the foam is caused or eliminated to the pretreatment process is very important, the total number of bubbles is beneficial to some processing technology, but the quality of the cleaning agent is not how much the foam is, and when the inside is spewing, the cleaning agent is required to be low bubble, otherwise mass production can not be carried out normally.

4. Pay attention to the quality of water cleaning. In order to better alleviate the level of environmental pollution, industrial aluminum accessories should first try to avoid bringing the product workpiece into the cleaning solution to pollute the next process. In addition, multi-level water cleaning should be considered, generally secondary water cleaning, and some processing processes or pure water cleaning. When the tap water is cleaned with the later stage water, the large contamination shall not exceed one tenth of the workpiece of the previous stage, so the residual liquid concentration value of the workpiece of the second stage washing product is only one percent of the original concentration value. When washing with cold water, reverse flow filling shall be selected to save water resources.

The company is committed to the development, manufacturing and sales of industrial aluminum products and various civil aluminum products. It has supporting production equipment and suppliers such as aluminum rod melting and casting, large extruder, anodic oxidation line, coloring oxidation line, electrophoretic painting line, electrostatic spraying line and product machining.